The PS 500 M2 D mainly convinces by its multiple applications. With a hopper capacity of 500 litres, this special device is able to contain large quantities of spreading material. We recommend the PS 500 M2 D to farmers and contractors managing large surfaces.
The seeds are fed from the seed hopper via the electrically controlled seeding shaft into the air duct. The seeds are conveyed by air support through plastic hoses to the dispersion plates, and then evenly distributed close to the soil. This enables precise seeding even in windy conditions!
1 For use with the Control Box 5.2 & 6.2
2 For use with the Control Box 1.2 & 5.2 & 6.2
The calibration button hugely simplifies the calibration test and can be fixed almost everywhere on the implement due to the integrated magnets. The hopper discharge of the implement can also be performed via the calibration button.
Cable length: 1 m
For use with the Control Box 5.2 & 6.2 & 5.7
This bracket is mounted on the rearmost crossbar of the soil tillage implement so the spreader can be assembled. The mounting kit includes a platform with steps and a bracket whose angle can be adjusted for the mounting of the Disc Spreader, Multi-Metering System or Pneumatic Seeder PS 120 - 500 (with electric or hydraulic fan).
The control box bracket can be mounted on an already existing Müller bracket (pipe).
For switching the PS between several soil tillage implements. The separation process can be done without tools.
The P8 Y divider mounting kit includes 1 roll hose (25 m), 8 dispersion plates, 4 hexagonal bars for the dispersion plate assembly, as well as 8 Y dividers.
This kit enables you to retrofit a platform including a step on your soil tillage implement in order to easily get to your seeder.
The 8 m cable is screwed on the battery side directly with the battery poles and a 3-pin standard plug is mounted at the other end, which can be installed permanently in the tractor.
The cyclone shape achieves optimal air separation of seeds. This ensures optimal seed placement.
Necessary when the performance of the electric fan is not sufficient.
Necessary when the performance of the electric fan is not sufficient and a hydraulic fan cannot be used.
Only suitable for PS 120 - 500.
Extend your device cable in order to connect your device to the control box.
Extend your device cable in order to connect your device to the control box.
Y-divider smooth
With this sensor, the speed of the hydraulic fan is displayed on the Control Box 5.2 and 6.2.
The accessory kit contains the key parts for mounting the PS 120 - 500 on a second soil tillage implement. This means that these parts do not need to be dismantled and assembled. This kit includes 1 roll of hose 25 m, 8 dispersion plates, articulated stud shafts, 4 hexagonal edging shafts 1.2 m, 1 counter plate and 8 cable ties.
