PS 300 M1 D TWIN

The PS 300 M1 D TWIN allows to spread two entirely different seed types/seeds with one implement. The hopper is divided in the middle by a partition wall. The Control Box 5.7 controls each seeding shaft side separately, which means the spread rate is kept constant.

Functional Principle

The 300 l hopper is divided into two chambers with a volume of 150 litres each by a centre partition. The PS includes a divided meter roll powered by two independent motors. It is possible to equip one half of the meter roll with fine metering cartridges and the other one with coarse metering cartridges. As a result, two different seed sizes in different quantities can be applied precisely at the same time. With the air flaps, it is possible to adapt the air quantity to the different seeds. Control Box 5.7 enables the user to control each half of the meter roll separately. Therefore, a calibration test is possible for each half of the meter roll. An additional function is the use of two fill level sensors in order to recognise which hopper side is empty.

EXACT

  • Completely non-corrosive (CDP coating) as Pneumatic Seeders of the Fertiliser Edition
  • Better overall sealing than PS Standard
  • Divided steel hopper
  • Divided seeding shaft with one gearbox motor each

VERSATILE

  • Possibility to spread fertiliser, micro granules, pesticides and catch crops
  • Universal mounting options on soil tillage implements, seed drills, single grain machines or culture maintenance implements - irrespective of manufacturer

COMFORTABLE

  • Speed-adjusted seed rate spreading & headland management with sensors1 (optional)
  • Fill level monitoring1 in each hopper half
  • One air flap per seeding shaft for individual air regulation
  • Agitator drive via gear wheel (can be switched off)

1 For use with the Control Box 5.7

Application Areas of
PS 300 M1 D TWIN

The Pneumatic Seeder TWIN in Action


APV users about PS 300 M1 D TWIN

PS 300 M1 D TWIN
Mr Nagl reports about the PS 300 M1 D TWIN

After the harvest is before greening!
In this case, our PS 300 M1 D TWIN is in use. The container is divided in the middle by a partition, which makes it possible to deploy two completely different seeds. In this application, oil radish with mustard was spread in one chamber and in the other buckwheat and vetch.
By the control box 5.7, each seed side page can be controlled separately, only in this way a uniform field emergence is achieved.
Of course, our PS TWIN is also suitable for fertilisers!

L. Nagl, Farmer

 

Anwender, Pneumatisches Sägerät PS 300 M1 D TWIN aufgebaut auf einem Grubber

Share your experience with APV products!

To the form