MDC 40 M1
Max. metering quantity Dimensions Seed hopper | Net weight Power data
|
MDC 40 M1
The Multi-Metering System MDC 40 M1 is a special version of the MDG 40 M1. It is especially sealed and its concept is perfectly well suited for granules (e.g.: Vydate, Belem, Goldor Bait, Attracap, Mocap, etc.) that can only be spread in 2 rows without air support. Due to the pre-installed sure-fill adapter, you do not get in contact with the substances during filling. The granules are reliably metered via our tried and tested seeding shaft. Via two hoses, the substance reaches the fishtail coulters directly, which then safely place the granules in row with great precision.
Application Areas of
MDC 40 M1
- Sealed spreader for the secure spreading of your granulated pesticides
- Metering unit made of stainless steel
- Can be converted to MDS or MDP
The spreader is not suitable for corrosive
fertilisers and other substances!
Accessories
Calibration button
The calibration button hugely simplifies the calibration test and can be fixed almost everywhere on the implement due to the integrated magnets. The hopper discharge of the implement can also be performed via the calibration button.
Cable length: 1 m
For use with the Control Box 5.2 & 6.2 & 5.7
Power supply AP (8 m long)
Power supply cable for additional towing vehicle.
Power cable for tractors 8 m
The 8 m cable is screwed on the battery side directly with the battery poles and a 3-pin standard plug is mounted at the other end, which can be installed permanently in the tractor.
Extension cable PS MX 2 m
Extend your device cable in order to connect your device to the control box.
Extension cable PS MX 5 m
Extend your device cable in order to connect your device to the control box.
Fill level sensor for MD
The fill level sensor triggers an alarm on the control box if there is too little seed in the hopper.
Cable length: 2 m
For use with the Control Box 1.2 & 5.2 & 6.2 & 5.7
Further information
Control Box 1.2
The Solid Base
The Control Box 1.2 is the ideal starter module and is characterised by its compactness. It controls the fundamental seeding functions and is compatible with selected machine sensors. Adjustment of the speed of the seeding shaft and fan is easy, quick and straightforward.
Functions
- Electronic control and monitoring of the seeding shaft
- Electronic control and monitoring of electric fan and the spreading plate (for MDS and UD)
- Electronic adjustment of the spread rate during operation
- Calibration test
- Acoustic and visual error warning
- Emptying
- Device monitoring (in combination with implement sensors. Example: Pressure monitor)
- Possibility of fill level alert (in combination with implement sensors. Example: Fill level sensor)
Control Box 5.2
The Bestseller
The Control Box 5.2 is the most popular version of the APV control boxes and includes the following functions: Precise speed calibration, regulation of the electric fan and automatic execution of the calibration test.
Functions
- Electronic control and monitoring of the seeding shaft
- Electronic adjustment of the spread rate during operation
- Emptying and automatic calibration test (only weighing!)
- Calibration test: Display possible in kg/ha, grains/m² and g/m²
- Speed calibration
- Headland management (in combination with tractor linkage sensor)
- Automatic adjustment of spread rate to travel speed (in combination with the speed sensor)
- Device monitoring (in combination with implement sensors. Examples: Pressure monitor and fill level sensor)
- Preseeding
- Calibration test right at the implement (in conjunction with the calibration button)
- Adjustment of electric fan and spreading plate (for MDS and UD)
- Display of the operating voltage and the amperages
- Total hours and daily hours counter, total hectares and daily hectares counter
- Selection of different languages
- Choice beween different measuring units (metric, imperial)
Control Box 5.7
The Multi-Tasking Wonder
If you want to operate two MDCs in parallel and independently of each other, Control Box 5.7 is the perfect choice for you. To do so, you need an additional adapter cable for the use of two PS. The control box is compatible with all sensors.
Functions
- Regulation and monitoring of the seeding shafts through the electronics
- Electronic adjustment of the spread rate during operation
- Emptying
- Automatic calibration test (only weighing!)
- Calibration test: Option of displaying in kg/ha and seeds/m²
- Calibration of the speed
- Headland management (in combination with tractor linkage sensor)
- Automatic adjustment of spread rate to the forward speed (in conjunction with the speed sensor)
- Implement monitoring (in conjunction with implement sensors such as pressure monitors and a fill level sensor for each seeding shaft)
- Premetering
- Calibration test right at the implement (in conjunction with the calibration button)
- Regulation of electric fan (for MDS and UD)
- Parallel operation of up to two APV seeders independently of each other
- Independent controlling of up to two seeding shafts and an electric fan
- Total hours and daily hours counter
- Total hectares and daily hectares counter
- Selection of different languages
Modular Implement Extensions
You can upgrade and convert your Multi-Metering System at any time - From a spreader without air support to a pneumatic catch crop seeder or a slug pellet spreader with spreading disc. We ensure the usefulness of your investment and enable a wide range of applications with low conversion effort!